UFC 4-021-02NF
27 September 2006
change 1, 23 October 2006
Figure 4-3. Example of a "Quad-Screen" Display
4-3.11
Switching Display uses time programming to show different camera images
on the same display. An example of "switching" would be a single CRT display to
display alternating images from two different cameras. An application would be using a
single monitor to display alternating images of two cameras at five seconds duration
each. The sequence would be to display the Camera A for five seconds, followed by a
display of the Camera B image for five seconds, followed by Camera A for five second,
and so on as shown in Figure 4-4.
4-3.12
Table 4-1 provides CCTV-display component application guidance.
49
Previous Page
