UFC 4-150-08
01 April 2001
All sketches and other ancillary notes should be kept in the same
notebook.
Table 2-1. Commonly Used U.S. Navy Pier Mooring Fittings
DESCRIPTI
SIZE
HEIGHT
BOLTS
WORKING
Horz
ON
CAPACITY
BASE
@45
Nom
300 x 25 mm dia.
SPECIAL
1200 mm (48 in)
2936 kN (660 kips)
(12 x 1-in) dia.
MOORING
1200 x 1200 mm (48x48 in)
1913 kN (430 kips)
BOLLARD "A"
2002 kN (450 kips)
SPECIAL
1112.5 mm (44.5 in)
200 x 68.75 mm dia.
1201 kN (270 kips)
MOORING
(8 x 2.75-in dia)
975 x 975 mm (39x39 in)
961 kN (216 kips)
BOLLARD "B"
890 kN (200 kips)
LARGE
1112.5 mm (44.5 in)
100 x 43.75 mm
463 kN (104 kips)
BOLLARD
(4 x 1.75-in dia)
975 x 975 mm (39x39 in)
294 kN (66 kips)
WITH HORN
311 kN (70 kips)
250 x 43.75 mm
Nom = 334 kN
LARGE
650 mm (26 in)
(10 x 1.75-in dia)
(75* kips)
DOUBLE BITT
WITH LIP
1837.5 x 700 mm (73.5x28 in)
250 x 40.625 mm
Nom = 267 kN
LOW
450 mm (18 in)
(10 x 1.625-in dia)
(60* kips)
DOUBLE BITT
1437.5 x 537.5 mm (57.5x21.5 in)
WITH LIP
42-INCH
325 mm (13 in)
150 x 28.125 mm
Nom = 178 kN
CLEAT
(6 x 1.125-in dia)
(40 kips)
650 x 356.25 mm (26x14.25 in)
100 x 28.125 mm
30-INCH
325 mm (13 in)
Nom = 89 kN
(4 x 1.125-in dia)
CLEAT
400 x 400 mm (16x16 in)
(20 kips)
*Working capacity per barrel; after NAVFAC Drawing No. 1404464
2-4
ENGINEERING EVALUATION. An evaluation of the data can only be
conducted once the inspection is complete. The field data as well as the existing data
will be reviewed and analyzed to formulate allowable load criteria.
2-5
TYPE OF MOORING SERVICE. The type of mooring service should be
considered when planning the inspection frequency. For example, Berths with Mooring
2-4
Previous Page
