MIL-HDBK-1191
be a UL Master Labeled System.
TABLE 10-1 APPLICABLE REFERENCES
ITEM:
REFERENCE NO:
TITLE OR DESCRIPTION:
1.
MIL-HDBK-1190
FACILITY PLANNING AND DESIGN GUIDE
2.
NFPA-30
FLAMMABLE AND COMBUSTIBLE LIQUIDS CODES
3.
NFPA-37
STANDARDS FOR THE INSTALLATION OF COMBUSTION
ENGINE AND GAS
4.
NFPA-70
NATIONAL ELECTRICAL CODE
5.
NFPA-99
STANDARDS FOR HEALTH CARE FACILITIES
6.
NFPA-101
LIFE SAFETY CODE
7.
NFPA-110
EMERGENCY AND STANDBY POWER SYSTEMS
8.
NFPA-780
LIGHTNING PROTECTION CODE
9.
ANSI-C2
NATIONAL ELECTRICAL SAFETY CODE
10.
ANSI Y32.2
GRAPHIC SYMBOLS FOR ELECTRICAL AND
ELECTRONICS
11.
MIL-HDBK-419
GROUNDING, BONDING AND SHIELDING FOR
ELECTRICAL EQUIPMENT AND FACILITIES (VOL I
and II)
12.
MIL-HDBK-1013/1A
DESIGN GUIDANCE FOR PHYSICAL SECURITY OF
FACILITIES
13.
MIL-HDBK-1008
FIRE PROTECTION
14.
IEEE C62.41.91
IEEE RECOMMENDED PRACTIC ON SURGE VOLTAGE IN
LOW VOLTAGE AC
POWER CIRCUITS
15.
IEEE STANDARD
IEEE RECOMMENDED PRACTICE FOR GROUNDING OF
142
INDUSTRIAL AND
COMMERCIAL POWER SYSTEMS
16.
IEEE STANDARD
IEEE RECOMMENDED PRACTICE FOR ELECTRIC POWER
241
SYSTEMS IN COMMERCIAL BUILDINGS
17.
IEEE STANDARD
IEEE RECOMMENDED PRACTICE FOR PROTECTION AND
242
COORDINATION OF INDUSTRIAL AND COMMERCIAL
POWER SYSTEMS
18.
IEEE STANDARD
IEEE RECOMMENDED PRACTICE FOR INDUSTRIAL AND
399
COMMERCIAL POWER SYSTEM ANALYSIS
19.
IEEE STANDARD
IEEE RECOMMENDED PRACTICE FOR EMERGENCY AND
446
STANDBY POWER
SYSTEMS
20.
IEEE STANDARD
IEEE RECOMMENDED PRACTIC FOR THE DESIGN OF
493
INDUSTRIAL AND COMMERCIAL POWER SYSTEMS.
21.
IEEE STANDARD
IEEE RECOMMENDED PRACTICE AND REQUIREMENTS
519
FOR HARMONIC CONTROL IN ELECTRICAL POWER
SYSTEMS.
22.
IEEE STANDARD
IEEE RECOMMENDED PRACTICE FOR ELECTRICAL
602
SYSTEMS IN HEALTH CARE FACILITIES.
23.
IEEE STANDARD
IEEE RECOMMENDED PRACTICE FOR POWER SYSTEM
1100
AND GROUNDING SENSITIVE ELECTRONIC EQUIPMENT.
10-22
Previous Page
