wall and floor coverings, heating and air conditioning systems, and elevators. Not included are items generally
termed personal property such as computer systems, telephone instruments, and furniture. Also not included are
project costs such as design, supporting facility costs, equipment acquired with other funding sources (e.g. mission-
funded range targets), contingency costs, and supervision, inspection, and overhead (SIOH).
Use of Construction Cost Factors
Construction cost factors form the basis of calculating plant replacement value in a consistent manner across DoD. Plant
replacement value represents the cost to design and construct a notional facility to replace an existing facility at the same
location. The standard DoD algorithm for calculating plant replacement value is:
Plant Replacement Value = Facility Quantity7 x Construction Cost Factor x Area Cost Factor8 x
Historical Records Adjustment9 x Planning and Design Factor10 x
Supervision Inspection and Overhead Factor11 x Contingency Factor12
Construction cost factors can also support new construction cost estimates with the addition of allowance for site preparation,
earthwork, landscaping, and related factors. As with sustainment cost calculations, such estimates are most reliable at the
programmatic level, and lose accuracy when applied to specific facilities or projects. These calculations can be useful for DoD
and Service-level modeling of:
Re-stationing and Regionalization
Joint facilities studies
Determining rates of re-capitalization
Describing the magnitude of a facility inventory in a common unit of measure
The application of cost factors to existing real property records could lead to large errors if the inventory and units of measure are not first screened and
validated, as is done in the DoD Facilities Assessment Database. These errors and conversions primarily involve facility categories that are measured in terms of
capacity (miles, feet, kilovolts, kilowatts, gallons, thousands of gallons per day, millions of BTU per hour, etc.)
A geographic location adjustment for costs of labor, material, and equipment, published in Part 2 of this pricing guide.
An adjustment to account for increased costs for replacement of historical facilities or for construction in a historic district; the current value of the factor is
A factor to account for the planning and design of a facility; the current value of this factor is 1.09 for all but medical facilities and 1.13 for medical facilities.
A factor to account for the supervision, inspection, and overhead activities associated with the management of a construction project; the current value of the
factor is 1.06 for facilities in the continental US (CONUS) and 1.065 for facilities outside of the continental US (OCONUS).
A factor to account for construction contingencies; the current value of the factor is 1.05.