CEMP-E
TI 810-332
10 January 2002
SUPPORT CHANNEL
>
SYMMETRICAL ABOUT >
6"
1
2
VARIES
NOTE:
SEE FIGURE 4-5 FOR SECTION
1
COMPOSITE PLAN - TRENCH
NO SCALE
1/2" P L
EMBEDDED IN
SEE DETAIL
C
TRENCH WALL
CHANNEL
6"
MATERIAL
VARIES
SECTION
2
NO SCALE
3/16
NOTE: THE CHANNEL SUPPORT MAY LAY ON TOP
ANGLE
OF THE ANGLE RATHER THAN BEING SUSPENDED
CHANNEL
BELOW THE ANGLE AND HELD ON BY BOLTS AS
SUPPORT
SHOWN. PLACING THE CHANNEL ON TOP WOULD
ALLOW THE ANGLE TO SUPPORT THE CHANNEL
TWO A307
AND THE BOLTS WOULD HOLD THE CHANNEL IN
BOLTS
POSITION
PLATE W/WELDED ANCHOR
DETAIL
STUDS (SEE TABLE 4-1 FOR
C
NUMBERS AND SIZES)
NO SCALE
PIPE SUPPORT CHANNEL
Figure 4-4. Pipe Support Channel.
4-7
Previous Page
