MIL-HDBK-1022A
2.3.10.1 Steam Turbine Lubricating Oils [0-250]
[MIL-PRF-17331]
a) For use in main turbines and gears, auxiliary
turbine installations, certain hydraulic equipment, general
mechanical lubrication, and air compressors.
(1)
Flash Point:
400 degrees F (204 degrees C)
minimum
(2)
Pour Point:
20 degrees F (-6 degrees C)
maximum
(3) Viscosity at 104 degrees F (40 degrees C),
80 to 104 x 10-5 ft2/s (74 to 97 x 10-6 m2/s)
2.3.10.2 Lubricating Oils [0-278], [MIL-PRF-9000]. For use
in advanced design high-output shipboard main propulsion and
auxiliary diesel engines using fuel conforming to MIL-F-16884.
2.3.10.3 Special Precautions for Lubricating Oils. To pump
the oil when the ambient temperature of the lubricating oil is
less than 20 degrees F (11 degrees C) above the pour point
temperature, heat the lubricating oil. At the pour point
temperature, the oil becomes gel-like and is difficult to
pump.
2.3.11
Hydrazine - Water (H-70) [MIL-PRF-26536]
2.3.11.1 Physical Properties of H-70. This fuel is a mixture
of 70 percent hydrazine and 30 percent water. It is a clear,
oily, water-like liquid with a fishy, ammonia-like odor. It
is stable under extremes of heat and cold; however, it will
react with carbon dioxide and oxygen in the air. It may
ignite spontaneously when in contact with metallic oxides such
as rust.
2.3.11.2 Special Precautions for H-70. Keep working and
storage areas clean and free of materials that may react with
hydrazine. Provide only stainless steel in areas where
extended contact is possible. Areas where incidental contact
14
Previous Page
