UFC 3-535-01
17 November 2005
13-9.5.6
Light Fixture Supports, 0 to 12 Meters (40 Feet)
13-9.5.6.1 For mounting light fixtures up to 2 meters (6 feet) above ground level, use
0.05 meters (2 inch) diameter EMT which is fitted at the bottom with a frangible coupling
conforming to FAA Drawing C-6046.
13-9.5.6.2 For light fixtures elevated between 2 meters (6 feet) and 12 meters (40
feet) above ground level, use glassfiber low impact resistant (LIR) frangible support
structures meeting FAA-E-2702 and FAA Drawing Series D-6155, ALSF-2, 6' to 128'
and MALS, 40' to 128' LIR Structures.
Figure 13-5. FAA-E-2628, or FAA L-849E, Elevated, Condenser Discharge
(Sequenced Flashing Light)
FLASHER HEAD
POWER OR INTERFACE UNIT
DIMENSIONS ARE FOR REFERENCE ONLY
OUTLINE DIMENSIONS
POWER OR INTERFACE UNIT:
LIGHT: SEQUENCE FLASHING, ELEVATED,
TYPE AS DETERMINED BY
FAA-E-2628, OR FAA AC 150/5345-51,
MANUFACTURER
TYPE L-849 STYLE E.
MASTER CONTROLLER:
LAMP: PAR56, FLASH TUBE,
(NOT SHOWN) AS DETERMINED
TYPE AS DETERMINED BY
BY MANUFACTURER
MANUFACTURER
188
Previous Page
