UFC 3-420-01
25 October 2004
Including changes 1 and 2, October 2006
ICC.
1-6
PRIMARY VOLUNTARY CONSENSUS STANDARD REFERENCE. The
DoD adopts the
||content||
\ latest /1/ edition of the International Code CouncilTM International
Plumbing Code as the primary voluntary consensus standard for DoD facility plumbing
systems.
1-6.1
International Plumbing Code Copyright. "The International Plumbing
Code" is copyrighted by International Code Council, Inc., Falls Church, Virginia, U.S.A.
All rights reserved. Without advance written permission from ICC or its duly authorized
agent, no portion of the IPC may be reproduced, distributed, or transmitted in any form
or by any means, including, without limitation, electronic, optical, or mechanical means
(by way of example and not limitation, photocopying, or recording by or in an
information storage and retrieval system). For information on permission to copy IPC
material exceeding fair use, please contact:
Executive Vice President, International Code Council
5203 Leesburg Pike, Suite 708,
Falls Church, Virginia 22041-3401
1-6.2
IPC Additions, Deletions, and Revisions. The additions, deletions, and
revisions to the IPC sections listed in Appendix A "Supplemental Technical Criteria" of
this document preserve the appropriate supplemental technical criteria for use in current
and future designs of DoD facilities. When and if these supplemental technical criteria
are adopted into the IPC, they will be removed from this document. When interpreting
the International Plumbing Code, the advisory provisions must be considered
mandatory; interpret the word "should" as "shall".
The format of Appendix A, including English and metric unit references, does
not follow the UFC format, but instead follows the format established in the IPC, to the
extent possible.
1-7
SECONDARY VOLUNTARY CONSENSUS STANDARD REFERENCES.
The DoD adopts the current issue of the following voluntary consensus standards, fully
referenced in a later paragraph:
(1) American Society of Heating, Refrigerating, and Air Conditioning
Engineers, Inc. (ASHRAE) Handbook Series, including the latest editions of
the following:
(a) Fundamentals
(b) HVAC Applications
(c) HVAC Systems and Equipment
(d) Refrigeration
(2) ASHRAE Standard 90.1, Energy Efficient Design of New Buildings Except
1-2