UFC 3-560-01
6 December 2006
Including change 1, 7 December 2006
4-4.2
Table 4-1, entitled "PPE Criteria", describes clothing requirements as a
function of hazard/risk category. Table 4-1 has been developed utilizing Table
130.7(C)(11) in NFPA 70E (including Tentative Interim Amendment (TIA) 04-1).
Perform a flash hazard analysis in accordance with NFPA 70E, Section 130.3, to
determine the personal protective equipment (PPE) requirements for the intended work
location.
In lieu of performing this analysis, utilize Table 4-2, "Hazard/Risk Category
Classifications for Work Tasks on Grade" and Table 4-3, "Additional Work Tasks and
Associated PPE Requirements". Table 4-2 has been developed utilizing Table
130.7(C)9(a) in NFPA 70E (including Tentative Interim Amendment (TIA) 04-1) and
Table 4-3 addresses specific service SOPs. Table 4-3 takes precedence over Table
4-2 for any interpretation or comparisons of the two tables. A documented flash hazard
analysis must be performed for any condition not covered by these tables. Any tools
used as part of the task must be rated for the line-to-line voltage of the energized
equipment.
4-5
Previous Page
