MIL-HDBK-1191
dashed lines. Provide Joint Schedule Numbers (JSN) as indicated in the
Medical Facility Room Contents List (MFRCL) for all applicable logistical
categories.
B.3.3.6
HVAC plans showing layout of mechanical rooms with all major
equipment and one line drawing of distribution systems. Distribution
mains shall be dimensioned;
B.3.3.7
Plumbing plans showing plumbing, medical air, vacuum, and
medical gas equipment and major distribution lines. Water supply and
gravity drainage mains shall be dimensioned.
B.3.3.8
Electrical plans showing electrical room layouts, light fixture
locations, receptacle locations, motor controls, and locations of
panelboards and distribution equipment. Provide single line diagrams of
the normal/ essential electrical systems, emergency power, and UPS;
B.3.3.9
Communication plans showing location of communication equipment
and devices. Show layout of communication closets and provide single line
diagram for each system;
B.3.3.10 Fire protection and life safety plans showing sprinklered areas,
fire rated walls and doors, smoke compartmentation, fire pumps, stand
pipes, fire extinguisher cabinets, fire alarm, and fire exits. Show the
occupancy classifications and maximum travel distances to smoke and fire
barriers.
B.3.3.11 For addition/alteration projects, preliminary demolition
drawings indicating the removal of structural, architectural,
mechanical/electrical/communications systems, asbestos and hazardous
materials.
B.3.4
A comprehensive narrative describing various architectural and
engineering systems being considered:
B.3.4.1
Civil Design Narrative. Include the site investigation and
utilities reports based on further refinement of the S-2 requirements.
Summarize the civil design parameters, parking, and the major features of
the design;
B.3.4.2
Architectural Design Narrative. Address the overall
architectural concept including: interior (in accordance with Appendix A)
and exterior finish materials wall systems, roofing systems, acoustics,
base architectural plan, floor-to-floor heights, contingency and
mobilization features, energy conservation features, UFAS features;
B.3.4.3
Structural Design Narrative. Address the selected structural
foundation and framing systems considered and provide economic basis
Apdx B-6
Previous Page
