UFC 4-171-05
1 January 2005
with change 25 October 2006
4-3.4
Storage Room
4-3.4.1 This space is provided for storage of ancillary equipment issued with vehicles,
including operators vehicle maintenance tools, canvas, canvas bows, seats,
sideboards, etc. It is best located adjacent to tools and parts storage, and may be
divided with caging for units.
4-3.4.2
Space Design Information
General/Code
Size 96 sf (8.9 sq m) per authorized workbay
Occupancy low-hazard storage
Occupancy count not occupied; typically 1 person per 300 sf (27.9 sq m)
Architectural/Interiors
Minimum STC rating 40
Ceiling height
Floor sealed concrete
Base none if CMU; rubber if gypsum board
Walls painted CMU; painted gypsum board as an alternative
Ceiling exposed structure, painted
Trim \ none /2/
Lockset storeroom
Mechanical
Heating 55 degrees F (13 C)
Cooling none
Ventilation ventilate if workstation located here
electrical
Lighting 30 fc
Receptacles convenience duplexes; computer duplex if automated inventory
Voice/data wall voice receptacle; data receptacle if automated inventory
Furniture
equipment
Open shelving
special features or considerations
Ordinary hazard sprinklers
4-3.5
Special Equipment Alcove
4-3.5.1 The Tenants typically have equipment such as tire changers, balancers, etc.,
which is in frequent use, but cannot be located within the maintenance bays. An
authorization of 200 sf (18.6 sq m) is provided to accommodate this equipment. The
designer should locate this alcove off the workbay area where this equipment can be
permanently located, convenient to the workbays and with sufficient space for operation
of the equipment.
4-3.5.2 Space Design Information: Refer to the space design information for the
workbays; this space is treated as an integral part of the workbays, and the space
134
Previous Page
