Project Name
Project No. ___________
UFC 4-721-11.1, UEPH Complexes, 26 Nov 01
BUILDING DESIGN
Drawing Type / Scale
Show This Information
Transverse and Longitudinal
Typical structural system.
Sections
Building materials.
1:100 [1/8"=1'-0"]
(For each building type)
Vertical dimensions.
Typical Wall Sections
Typical wall, foundation, floor, and roof section.
1:20 [3/4"=1'-0"]
Materials. Cavity wall.
(For each building type)
Wall fire and STC ratings
Details
Special Features
Scale as required.
Finish Schedule
All rooms.
Note: Metric Scales are preferred, however, inch pound scales may continue to be used only if they
enhance competition.
BUILDING ENGINEERING
Drawing Type / Scale
Show This Information
Mechanical Floor Plan
HVAC system layout. Flues.
1:100 [1/8"=1'-0"]
Hot water heater.
Equipment Efficiencies
Note: This information
may be shown on the
Other Energy Conservation Features Included in the Proposal
unit electrical plans if it
can be shown clearly.
Note: Duct Systems shown single line.
Electrical Floor Plan
Lighting fixture locations, properly labeled to show type of fixture.
Fixture schedule which indicates general fixture description,
1:100 [1/8"=1'-0"]
number and type of lamps, type of mounting, and any special
features.
Location of motors or special mechanical equipment.
Location of multi-builidng service equipment and building service.
Multi-building electrical riser diagram.
Electrical legend and notes.
Room names.
Note: Metric Scales are preferred, however, inch pound scales may continue to be used only if they
enhance competition.
(2) Specifications. Provide
||content||
\
Outline Specifications
/1/ indicating the quality of materials,
construction, finishes, fixtures, and equipment for the applicable items. Special attention should be given
to the identification and specification of energy conservation features included in the proposal, particularly
00110 - 16