Project Name
Project No. ___________
UFC 4-721-11.1, UEPH Complexes, 26 Nov 01
3.4.5 Electronic Submission: All CADD files in native [AutoCAD] [MicroStation] format, as well as all
prepared technical specifications shall be provided on CD-ROM. Two copies are required.
3.5 Structural Interior Design.
3.5.1 Definition: The Structural Interior Design (SID) shall involve the selection and sampling of all
applied finishes including material, color, texture and patterns necessary to complete the building's
interior architectural features. The SID shall also include all prewired workstation finishes and required
drawings for prewired workstations. This information shall be submitted in 3" D-ring binders, 8-1/2" x
11" format.
3.5.2 Present architectural finish samples in an orderly arrangements according to like rooms/areas
receiving like finishes. Each like room receiving like finishes will be noted as a Color Scheme. Each
Color Scheme shall have a written description of material used. This written description shall use the
same material abbreviations and notes that appear on the Room Finish Schedule and Legend in the
contract drawings. Present prewired workstation finishes on a color board separate from the
architectural finishes. Submit the SID binders concurrently with the architectural design submittals.
3.5.3 Preliminary Submittals: The Contractor shall submit three complete sets of the initial SID
package. The design philosophy shall use a warm neutral background color with appropriate accent
colors. All SID proposals shall be reviewed and approved by the Government. The Interior Designer
shall revise the SID binders after each review and update the SID to satisfy review comments. Each
submittal will follow this method of review until the Government approves the completed SID package.
3.5.4 Final Submittal: After approval of the Preliminary Submittal, the Contractor shall submit three
(3) complete sets of the approved and final Structural Interior Design package. Once the Contractor
has submitted the SID and the Government has approved the submittal, all materials, finishes, colors,
textures and pattern submitted and approved for this project are then considered as part of the
contract and the Contractor shall furnish all approved SID finishes. No deviations will be considered.
3.5.5 Format: Submit all SID information and samples on 8 1/2"x 11" modules with only one foldout.
The maximum foldout width shall be approximately 25 inches. No foldouts on the top or bottom of the
pages. Place the project title, base, architectural firm, page number and date on the bottom of each
page or module.
3.5.5.1 The module shall support and anchor all samples. Anchor large or heavy samples with
mechanical fasteners, velcro or double sided foam tape. Rubber cement or glue will not be
acceptable.
3.5.5.2 Assemble the 8 1/2" x 11" pages and modules in a 3" D-ring binder. Holes for placement of
the modules in the binder shall be 3/8" in diameter. Each binder shall be identified on the outside
spine and front cover by title, project number, percentage phase and date.
3.5.5.3 Material and finish samples shall indicate true pattern, color and texture. Carpet samples shall
be large enough to indicate a complete pattern or design.
3.5.5.4 Where paint manufacturers color names and numbers are used indicated the finish of the
paint such as gloss, semi-gloss, flat and so on.
3.5.5.5 Signage may include emblems, striping, letters, numbers and logos. The interior designer
shall consider visual appearance, organization, location, structural supports (if required) and relation to
other base graphics. Indicate on a separate signage sheet the location and message for all signage.
Submit a sample of the signage material finish and color with the structural finishes.
3.5.5.6 No photographs or colored photocopies of materials will be accepted or approved.
S
ection 01012 - Page 3
Previous Page
