UFC 4-171-05
1 January 2005
with change 25 October 2006
Floor VCT; carpet \tle/2/ as an alternative
Base rubber
Walls painted gypsum board
Ceiling suspended acoustical ceiling tile (ACT)
Trim none
Lockset office
Mechanical
Heating, occupied 68 degrees F (20 C); maintained 55 degrees F (13 C)
Cooling, occupied 78 degrees F (25 C); maintained ambient
Ventilation comply with ASHRAE 62.1; adequate ventilation for any printer
electrical
Lighting 50 and 100 fc; dual-level switching
Receptacles convenience and computer duplexes
Voice/data voice/data duplex each workstation
||content||
\ Furniture
One small computer station similar to full-time offices above (freestanding metal
desk-based furniture)
Upholstered mid-back task chair with adjustable seat height and arms
Drafting table (single pedestal desk optional), 36 in x 72 in
(0.9144 m x 1.8288 m)
Drawing storage flat files
Storage cabinet with shelves and lock
Printer stand
equipment
CAD terminals
Printer provided by Tenants
Line one (1) wall with tack boards and a small marker board, tack board
sized to accommodate standard "E-size" drawing paper, minimum of
36 in high x 48 in wide (0.9144 m high x 1.2192 m wide)
special features or considerations
Verify Tenant equipment power/data needs
Floor space should be provided for Tenant s freestanding plotter and large
freestanding printer /1/
4-2.36
Physical Readiness Training
4-2.36.1 This space is for the Tenants physical training (PT); the athletic/training
equipment is included in the design, and is provided and installed by the Government as
part of the project furniture package.
4-2.36.2 Exterior access should be direct or through a short corridor to allow soldiers
to incorporate running into their training. Access should avoid the main entries and more
formal spaces in the building.
4-2.36.3 A drinking fountain should be located in or near this space.
119
Previous Page
