UFC 4-171-05
1 January 2005
with change 25 October 2006
4-2.12.3 Space Design Information
General/Code
Size 100 sf (9.3 sq m)
Occupancy business
Occupancy count 1 person
Architectural/Interiors
Minimum STC rating 40
Ceiling height 8 ft - 8 in (2600 mm)
Floor -VCT
Base rubber
Walls painted gypsum board
Ceiling suspended acoustical ceiling tile (ACT)
Trim none
Lockset office
Mechanical
Heating, occupied 68 degrees F (20 F); maintained
55 degrees F (13 C)
Cooling, occupied 78 degrees F (25 C); maintained ambient
Ventilation comply with ASHRAE 62.1
electrical
Lighting 50 fc receptacles convenience and computer duplexes
Voice/data two voice/data duplex receptacles
||content||
\ Furniture
Workbench with laminated hardwood top and power strip (plug-in type)
Stool with woven "Crypton" upholstery
Lockable storage cabinet
equipment
There is no equipment provided for this room function/1/
special features or considerations
Continuous 110 v power strip above the workbenches
4-2.13
Classrooms
4-2.13.1 This space is used primarily for instructional training of unit personnel, but
may also be used as a conference/meeting room on occasion.
4-2.13.2 Classroom space authorizations are based on 8 sf (0.75 sq m) per person. If
the authorization allows, some larger and some smaller classrooms should be provided,
with larger classrooms accommodating up to 50.
4-2.13.3 The larger classrooms can be subdivided with a quality operable panel
partition, with an STC rating of 48-52. Extend the sound attenuation above the ceiling to
eliminate flanking points. For subdivided rooms, provide equipment for both sides of the
partition. Specifications for operable partition should include O & M manual, and
provision of multiple sets of any required operating hardware.
99
Previous Page
